|
| |
|
|
High-Power Li-Ion Battery Charger for Electromobil powered by Hydrogen Fuell-Cells
Šuňal, Martin ; Červinka, Dalibor (referee) ; Hejkrlík, Jan (advisor)
Main target of this thesis is deisgn High-Power Li-Ion Battery Charger. The next step is realize and energize it. Charger is designed as switching power supply concretely with regulators and electronic protects.Convertrer is directed with integrated circuit UC3845. This intelligent charger enables to get a very high output current (30A) and it has small dimensions. Usage of DC/DC convertrer as a base of a charger has many advantages like easy output current control, small dimensions, low weight and low production costs.
|
|
|
Design of class-D audio power amplifier
Fiala, Roman ; Götthans, Tomáš (referee) ; Brančík, Lubomír (advisor)
This semestral thesis describes class D low frequency power amplifiers and design of specific 2x100W class D power amplifier. The designed amplifier contains a second order sigma-delta modulator in which the quantization is controlled only by the delay of modulator components. This design does not include the clock generator which usually controls the quantization in sigma-delta modulators. This semestral thesis also includes design of a switched-mode power supply for the power amplifier and for the preamplifier. The PSpice program has been used for the design and verification of some sections of circuits. All designs have been built. Also basic parameters of completed circuits were measured.
|
|
|
Charger for lead-acid batteries
Kopuletý, Ondřej ; Procházka, Petr (referee) ; Ondrejček, Vladimír (advisor)
This bachelor‘s thesis deals with the modification, construction and testing of lead-acid battery chargers. It is described the principle of charging the batteries and individual topology of the switching power supplies. The original schematic diagram is taken from the thesis of Josef Kadlec. Diagrams of a power and control circuit have been modified. The topology of the charger is two switch forward converter with pulse transformer. The charging method is constant voltage with current limiting.
|
|
|
Uninterruptible Supply of the Hospital Information System
Kučera, Josef ; Sekora, Jiří (referee) ; Fedra, Petr (advisor)
This bachelor thesis is focused on the proposal for an appropriate source of uninterruptible power supply (UPS) to the school server UBMI where is currently installed HIS (hospital information system) CLINICOM Corporate SMS. UPS should have ensure the protection of data being unfinished, secure off site and to inform the line voltage failure.
|
|
|
Satellite power supply
Pavlík, Arnošt ; Boušek, Jaroslav (referee) ; Pavlík, Michal (advisor)
The bachelor thesis consists of the design and realization switched source for use in satellites of Cubesat type. The paper describes the theoretical knowledge of switched sources. The document also contains basic theoretical knowledge for the application of electronic devices in the cosmic environment and contains a description of the Cubesat concept and their application benefits. In the paper there is systematically described how to design a power source for application in a Cubesat satellite.
|
|
|
Laboratory Switching Power Supply
Slezák, Jakub ; Petržela, Jiří (referee) ; Šebesta, Jiří (advisor)
This bachelor’s thesis is concerned with design switching power supply based on forward converter with output voltage regulated in the range of 3 to 30V and load current to 1 A. First of all, it discusses the theoretical solution of basic types of converters and switching power supply problems. Followed by a proposal of various parts source, which was first established in the test version on the test board. Then was proposed printed circuit board and complete mechanical solutions. Source is also equipped with digital modules for measuring voltage and current, and is protected against overload.
|
|
|
The inverter for arc-welding
Vaculík, Josef ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
This diplom thesis theoretically deals about principle of pulse welding current source. Work explains operation principle of the single acting transmit converter used in realized construction and mention the others examples of converters types. Goal of the work is design individual parts of source : input filter, pulse transformer, output inductor and power semiconductors components. Thesis also contains description of the regulation circuitry of the converter, auxiliary power supply and pre-driver for power transistors. If everything will be all right prototype of the source will be assembled and measured. Results will be compared with theoretical assumptions.
|
|
|
High voltage power supply for dielectric strength
Klejma, Michael ; Červinka, Dalibor (referee) ; Martiš, Jan (advisor)
This thesis deals with a choice of proper solution of high votlage source with regulated DC output in range of 0 – 50 kV. Source will be used for testing of electrical insulators, with function of displaying voltage at which breakdown of the insulator occured. Due to low output current up to 1 mA it is possible to use a cascade voltage multiplier as suitable solution. The voltage multiplier is powered by switching-mode power supply with high voltage pulse transformer. The inverter uses single-acting innovative topology that enables a supply of alternating current to the voltage multiplier. This solution is simple, but an analysis of operation is difficult, as will be described in details in this thesis. Realization and testing of the source has been successfully done, but the source had problems with its own EMC. After debugging, requested parameters have been achieved.
|
|
|
Inverter for arc welding
Matiaško, Maroš ; Huták, Petr (referee) ; Vorel, Pavel (advisor)
This bachelor’s thesis describes designing, paremeter rating and construction of welding source on the principle of high-frequency inverter. The main scope of work is to design a switching inverter for arc welding on the principle of the forward converter. Welding source is regulated for demand of constant current.
|
guest ::
